With low & high power
Chracteristcs
Compact design, high performance and exceptional durability for handing abrasive liquid, widely used in general construction and civil engineering.
The body of motor and pump is made of rigid cast iron or stainless steel for long-lasting durability.
Greatly increased maximum submersion depth due to mechanical seal resistant to high pressure
Semi-open impeller made of high chrome alloy match with wearable plate (ductile iron) achieves superior durability.
Effective motor cooling due to discharge channel cast as part of the motor housing.
Discharge 50mm (2") to 150mm (6"), motor 0.25kW (0.35HP) to 11kW (15HP)
Hermetically sealed motor equiped build-in thermal protection.
Any inquiry,please email to sophia@astoncommodity.com
Specification
Capacity: up to 150m3/h
Head: up to 50 meters
Power: 0.25kW (0.35HP) to 11kW (15HP)
KSM0.25~0.75: single phase 220V±10%, 50Hz, 220V±10%, 60Hz
KSM1.5:single phase 220V±10%, 50Hz, 220V±10%, 60Hz
KS1.5~11 :three phase 400V±10%, 50Hz, 380V±10%, 60Hz
Insulation class: F
Protection class: IP68
Water temperature: up to 40ºC
Max.water depth: KSM 0.25~0.75kW; 10m KS (M) 1.5~11kW; 25m
Any inquiry,please email to sophia@astoncommodity.com
Application
Civil engineering
Mines, quarries, coal ore & slurries
Sewage treatment plants
General pumping purposes
Special features on request
Other voltages
The length of cable is optional
Advantages:
1.F-class insulated motor
2.wide voltage and heavy duty design
3.extrusion-resistant reinforced cable
4.water blocking,sealed cable entrance
5.water proof and leakage-proof thermal protector against lost phase,jam and overload
Any inquiry,please email to sophia@astoncommodity.com
6.high pressure rated sic mechanical seal
7.wear-resistance high chrome alloy impeller,harder than HRC55.
