The agitator pump KBDE series is a cast iron made,heavy-duty slurry pump employing the KBZ series as the base.
An agitator is provided to assist smooth suction of the pumping fluid.
The side-flow,top-discharge design keeps the motor cooling even if the pump is operated continuously with its motor exposed in
air,and it makes the pump easier to be placed in a confined space.
This pump is suitable for transferring or draining bentonite slurry used for slurry drilling,draining slurry mixed water in civil
engineering works or foundation works.
The pump can operate automatically with built-in intelligent control system,thus achieve low total energy costs.
please inquire through email sophia@astoncommodity.com
Specification:
Capacity: Up to 90 m³ /h
Head: Up to 30 meters
Power: 1.5Kw(2HP) to 3.7 Kw (3HP)
Power supply: Three phase 380 V± 10%, 50Hz, 60Hz,Three phase 400 V± 10%, 50Hz, 60Hz
Insulation class: F
Protection Class:IP68
Cable Length:8m
Max Water depth:25m.
Water temperature: Up to 40º C
Application:
Civil engineering
Mines,quarries,coal ore&slurries
Sewage treatment plants
General pumping purposes
Features:
Protect against reverse phase,ensuring correct impeller rotation;
Protect against open phase or impeller jam,thus prevent accidental damage;
Automatically stop the pump in event of overload,abnormal voltage and recovery 5min later;
The pump stops working at high temperature,and will automatically restart after cooling to the specified temperature;
The water sensor's height is adjustable to control pump operation and stop;
The pump stops working within 60s when water level is below the probe,
When the water level rises to contact the electric probe,pump starts operating again;
Rapid assessment about the pump operation and malfunction history.
please inquire through email sophia@astoncommodity.com
-
Materials of KBDE pump construction
hose coupling:cast iron
handle:rubber &steel
pump casing:cast iron
impeller:high chrome alloy
inlet plate:ductile iron
strainer:steel
rator:Shaft AISI420SS
bear:ball bearing
Mechanical Seal:Sicsic/carbon-sic( under 2.2kw) Sic-sic/Sic-sic( above 3.7kw)
Oil Seal
AC contactor
Water level sensor equipped
Controller block
Advantages:
1.F-class insulated motor
2.wide voltage and heavy duty design
3.extrusion-resistant reinforced cable
4.water blocking,sealed cable entrance
5.water proof and leakage-proof thermal protector against lost phase,jam and overload
6.high pressure rated sic mechanical seal
7.wear-resistance high chrome alloy impeller,harder than HRC55.
8.the discharge can be installed vertically or obliquely.
please inquire through email sophia@astoncommodity.com
